* Fix protruded infomation board section
Set "flexwrap: wrap" for sections. Set upper and lower padding for each section, and adjust clearances around sections accordingly. Settings for viewport threshold 500px is no more needed.
* Fix mistake of reducing information-board padding
In according with this fix, additional padding setting for maximum 840px width is no more needed.
* fix(web_push_notification): Do not hard reload tab
* fix(web_push_notification_worker): Guard against null subscription
* refactor: Incorporate pull request feedback
* fix(dropdown_menu): Keyboard navigation
* fix(icon_button): Add aria-pressed attribute
* fix(privacy_dropdown): Make accessible
* fix(emoji_picker_dropdown): Make accessible
* fix(icon_button): Support tabIndex
* fix(actions_modal): Remove icon from tab order
* fix(dropdown_menu): Add role=group
* fix(setting_toggle): Toggle via space key
* fix(dropdown_menu): Remove redundant handling of Space key
* fix(emoji_picker_dropdown): Remove redundant Space key handling
* fix(privacy_dropdown): Remove redundant Space key handling
* fix(status): Switch to article and add aria-posinset, aria-setsize
* fix(status_list): Use role=feed and pass more ARIA props to Status
* chore(eslint): jsx-a11y/role-supports-aria-props
* fix(dropdown_menu): Open as modal on mobile
* fix(dropdown_menu): Open modal on touch
* fix(dropdown_menu): Show status
* fix(dropdown_menu): Max dimensions and reduce padding
* chore(dropdown_menu): Test new functionality
* refactor: Use DropdownMenuContainer instead of DropdownMenu
* feat(privacy_dropdown): Open as modal on touch devices
* feat(modal_root): Do not load actions-modal async
`height: 100%` in `align-self: stretch` flexboxes doesn't work on Safari < 11.
https://bugs.webkit.org/show_bug.cgi?id=137730
This workaround uses flexbox instead of `height: 100%` to stretch height.
- Be less strict about the Ruby version, which resolves a build failure.
- Add libidn as a dependency (until Nanobox adds idn-ruby to the list of gems with a dependency on it).
- Remove redundant bundler commands (Nanobox's Ruby engine handles these things cleanly on its own, now).
* fix(column_header): Invalid ARIA role
* fix(column): Remove hidden nodes from the DOM
* refactor(column_link): Remove unused property hideOnMobile
* fix(column_header): Use aria-pressed
* fix(column_header): Make collapsed content not focusable, add focusable property
* fix(column_loading): Make header non-focusable
* fix(column_settings): Use role to group the toggles
* Fix padding in hero container, landing page
Erase hero container padding to fit registration form to full width. By this setting, heading padding disappears, so I adjust heading padding.
* Specify attribute strictly for heading padding
To overwrite padding-bottom in superior settings.
* Make padding shorthand more concise
* fix(compose): Use nav and remove redundant aria-label
* fix(tabs_tab): Use nav and add aria-label
* fix(app): Add aria-label for settings toggle button
* chore: Run yarn manage:translations
* Adjust mobile landing page
Change mobile viewport threshold to 840px in consideration of padding. Fix loss of "container hero" padding in about/more under 675px.
* Fix indent
* Update and expanding Dutch strings for 1.5
Only privacy policy is not translated, but is included. Hopefully I have time to translate this another time (you can set your own privacy policy now anyway).
* Missing file
* A few changes cause of changes in another file
* Fix
* Update Dutch strings for 1.5
* nl
* fix
don't know how that ended up there
* Update nl.yml
Deployment with Capistrano was failing due to a mismatch between the loaded
version of Capistrano and the one specified in the deployment
configuration. Bumping the version in config/deploy.rb fixes this issue.
Setting only padding-left made the logo left-shifted on mobile page. Margin-right was old setting for adjusting clearance between old logo and letter "Mastodon".
* Allow domain blocks to reject media without silencing or suspending
* Fix typo
* Hide 'Reject media' button when superfluous, instead of disabling it
* Properly hide 'reject media' checkbox on page load if needed
This may happen when resubmitting the domain block form after an error.
* Don't ask whether undoing a media-only block should be retroactive
* Rename :media_only block to :noop
* Display :noop block as None in frontend, allow blocks that do nothing
* Remove 'coding' line auto-added by emacs
Change the placeholder used in the content warning field from "Content Warning" to "Write your warning here". This change should made it easier to understand what the field is about.
Change le message de substitution utilisé dans le champ d’avertissement de « Avertissement » à « Écrivez ici votre avertissement ». Ce changement devrait rendre plus évidente la fonction du champ.
* add fr-FR locales to the landing page
* moar french locales
* terms of service/privacy policy
* remove un-used locales in the client (yarn manage:translations)
* update french locales in the client
* remove duplicate locales in fr.yml
* fix typos per PR comments in fr.yml
* put back default messages
* translate untranslated keys on the client
* add "push" after notifications
* correctly ident ToS in fr.yml
* Mise à jour de la traduction de la page d’accueil
Met à jour les traductions et ajoute les chaînes manquantes suite à la refonte de la page d’accueil.
Update translations and add the strings introduced by the landing page's redesign.
* Correction d’erreurs
Corrige l’indentation de certaines clefs et supprime admin.settings.setting qui n’existe plus dans le projet original.
Fix some indentations and delete admin.settings.setting, which have been removed upstream.
* Use the same emoji data on the frontend and backend
* Move emoji.json to repository, add tests
This way you don't need to install node dependencies if you only
want to run Ruby code
* feat(compose): More space on mobile devices
* feat(compose): Hide navigation when typing on mobile devices
* fix(compose): Make animation faster
* fix(navigation_bar): Remove hardcoded title
* fix(compose): Prevent accidental bluring
* fix(compose): Increase max-height to 600px
* Do not raise unretryable exceptions in ResolveRemoteAccountService
* Removed fatal exceptions from ResolveRemoteAccountService
Exceptions that cannot be retried should not be raised. New exception
class for those that can be retried (Mastodon::UnexpectedResponseError)
* Refactor ResolveRemoteAccountService
* Remove trailing whitespace
* Use redis locks around critical ResolveRemoteAccountService code
* Add test for race condition of lock
* Wrap methods of ProcessFeedService::ProcessEntry in classes
This is a change same with 425acecfdb, except
that it has the following changes:
* Revert irrelevant change in find_or_create_conversation
* Fix error handling for RemoteActivity
* Introduce Ostatus name space
app/javascript/mastodon/main.js delayed the execution of modules,
but other entry points didn't. That leads to failure in executing
modules, which requires those polyfills.
Strictly enforce the rule to require any modules after loading
polyfill in entry points.
Though size of extended-video-player is already fixed to 80vw*80vh in components.scss, player size was also set to original video size in extended_video_player.js. Video size is fixed to 80vw*80vh, so video player's size must also be fixed to 80vw*80vh.
"defaults post privacy to followers-only" only means...
* default value of `visibility` param on post API
* default value for web UI privacy setting (i.e. it will be overridden if they once updated)
...so, many users won't see an effect of it.
* Shrink too wide single image modal
Fix too wide react-swipeable-view-container
Fix 0067f80 shrinking all react-swipeable-view-container
Change to apply max-width of react-swipeable-view-container only under media-modal.
Fix b30b03b just a typo
* Centering contents in image-loader
Centering small img, canvas, and video in image-loader.
* Add dependency on idn-ruby to speed up URI normalization
* Use normalized_host instead of normalize.host when applicable
When we are only interested in the normalized host, calling normalized_host
avoids normalizing the other components of the URI as well as creating a
new object
* Improve webfinger templates and make tests more flexible
* Clean up AS2 representation of actor
* Refactor outbox
* Create activities representation
* Add representations of followers/following collections, do not redirect /users/:username route if format is empty
* Remove unused translations
* ActivityPub endpoint for single statuses, add ActivityPub::TagManager for better
URL/URI generation
* Add ActivityPub::TagManager#to
* Represent all attachments as Document instead of Image/Video specifically
(Because for remote ones we may not know for sure)
Add mentions and hashtags representation to AP notes
* Add AP-resolvable hashtag URIs
* Use ActiveModelSerializers for ActivityPub
* Clean up unused translations
* Separate route for object and activity
* Adjust cc/to matrices
* Add to/cc to activities, ensure announce activity embeds target status and
not the wrapper status, add "id" to all collections
* Add Request class with HTTP signature generator
Spec: https://tools.ietf.org/html/draft-cavage-http-signatures-06
* Add HTTP signature verification concern
* Add test for SignatureVerification concern
* Add basic test for Request class
* Make PuSH subscribe/unsubscribe requests use new Request class
Accidentally fix lease_seconds not being set and sent properly, and
change the new minimum subscription duration to 1 day
* Make all PuSH workers use new Request class
* Make Salmon sender use new Request class
* Make FetchLinkService use new Request class
* Make FetchAtomService use the new Request class
* Make Remotable use the new Request class
* Make ResolveRemoteAccountService use the new Request class
* Add more tests
* Allow +-30 seconds window for signed request to remain valid
* Disable time window validation for signed requests, restore 7 days
as PuSH subscription duration (which was previous default due to a bug)
* chore(yarn): Install babel-plugin-preval as development dependency
* feat(babel): Add preval as a plugin
* feat(emojione_light): Prevaled module what tree-shaked emojione
* refactor(emoji): Use emojione_light
* feat: Preload emojione_picker bundle
* fix(emojione_light): Do not use Object.entries
* fix(emojify): Update tests
* chore(emojione_light): Remove silly ascii art
- Use unicode when selecting emoji through picker
- Convert shortcodes to unicode when storing text input server-side
- Do not convert shortcodes in JS anymore
* fr.json: replace "silencer" with "masquer"
"Silencer" as a verb does not exist in French. A good and valid replacement is "masquer".
* FR translation: use "masquer" for "silence"
Render function for BundleContainer must not be methods.
React doesn't know dependency of the method, so they won't rerender on property updates.
In this case, when you close modal and open another modal immediately,
old modal will be open instead of new one.
* Update @storybook/addon-actions to version 3.1.8
* Update @storybook/react to version 3.1.8
* Update autoprefixer to version 7.1.2
* Update babel-loader to version 7.1.1
* Update babel-preset-env to version 1.6.0
* Update chai to version 4.1.0
* Update js-yaml to version 3.9.0
* Update jsdom to version 11.1.0
* Update postcss-smart-import to version 0.7.5
* Update sinon to version 2.3.7
* Update substring-trie to version 1.0.1
* Update webpack to version 3.2.0
* Update webpack-manifest-plugin to version 1.1.2
* yarn upgrade
* Upgrade extract-text-webpack-plugin to version 3.0.0
* Upgrade intl-relativeformat to version 2.0.0
* Redesign the landing page, mount public timeline on it
* Adjust the standalone mounted component to the lacking of router
* Adjust auth layout pages to new design
* Fix tests
* Standalone public timeline polling every 5 seconds
* Remove now obsolete translations
* Add responsive design for new landing page
* Address reviews
* Add floating clouds behind frontpage form
* Use access token from public page when available
* Fix mentions and hashtags links, cursor on status content in standalone mode
* Add footer link to source code
* Fix errors on pages that don't embed the component, use classnames
* Fix tests
* Change anonymous autoPlayGif default to false
* When gif autoplay is disabled, hover to play
* Add option to hide the timeline preview
* Slightly improve alt layout
* Add elephant friend to new frontpage
* Display "back to mastodon" in place of "login" when logged in on frontpage
* Change polling time to 3s
Since es5-ext used `new Function("...")`, it caused CSP violation unless "unsafe-eval" included. So this patch updates it to the version which fixes it.
Note that this package is used in polyfills, so loaded only if needed. I've encountered this issue on iOS9.
cf. medikoo/es5-ext@d3864493
* Added a success page to remote following
Includes follow-through links to web (the old redirect target) and back to the remote user's profile
* Use Account.new in spec instead of a fake with only id
(fixes spec)
* Fabricate(:account) over Account.new
* Remove self from the success text
(and all HTML with it)
Since there is little point in retrying so often when a service is down
or does not exist anymore. Subscriptions are renewed 1 day before they
should expire, so retrying in 30 minutes, then 2 hours, then 12 hours
is fine. If even after that, the remote server does not work, there is
little sense in retrying more often than once a day
Also, uniqueness of the job should ensure that failed retries will
not result in multiple retries for the same endpoint when the next
resubscription cycle comes
The Nginx configurations used by Nanobox previously neglected to increase the default upload size limit. This PR bumps that value up to the current Mastodon limit of 8MiB.
* Specs for language detection
* Use CharlockHolmes instead of NKF
* Correct mistakes
* Correct style
* Set hint_enc instead of falling back and strip_tags
* Improve specs
* Add dependencies
* Changement de « Changement de mot de passe » en « Sécurité »
* Suppression de « (Two-factor auth) »
Change la valeur de la chaîne « two_factor_authentication » de « Identification à deux facteurs (Two-factor auth) » à « Identification à deux facteurs ».
La traduction anglaise entre parathentèse était redondante et gênait la lecture.
Change the value of the "two_factor_authentication" from "Identification à deux facteurs (Two-factor auth)" to "Identification à deux facteurs".
The English translation in brackets was superflous and was getting in the way of the reader.
* Remplace « ' » par « ’ »
Retire de la traduction les apostrophes droites « ' » (U+0027) au profit des apostrophes typographiques « ’ » (U+2019).
En typographie française, les apostrophes typographiques sont utilisées à la place des apostrophes droites. La traduction était jusqu’ici incohérente et utilisait les deux.
Remove from the translation all the vertical apostrophes (U+0027) in favor of the curly ones (U+2019).
In French typography, typographic apostrophes are used instead of vertical ones. The translation was incoherent and used both.
* Remplace « ... » par « … »
Remplace les séries de trois points par le caractère dédié « … » (U+2026).
Replace all the series of three dots by the dedicated character "…" (U+2026).
* Mise à jour
Crée config/locales/activerecord.fr.yml, ajoute de nouvelles chaînes et met à jour certains textes.
Les compteurs de caractères pour le pseudonyme et la biographie devrait maintenant pouvoir fonctionner même quand l’interface est en français.
Create config/locales/activerecord.fr.yml, add new strings et update some textes.
The caracters counters for the username and the biography should now work even when the interface is in French.
* Remplace « A » par « À »
Remplace « A » par « À » aux endroits où le mot est mal orthographié.
Replace "A" by "À" when the wrong word is used.
* Ajout d’espaces insécables
Ajoute des espaces insécables suivant les régles nécessaires en typographie française.
Add non-breaking spaces following rules of French typography.
* Remplace « certain » par « certain·e »
Harmonise la traduction en remplaçant « certain » par sa forme épicène.
Harmonize the translation by replacing "certain" (sure) by its epicene form.
* Corrige un angliscisme
Remplace « adresse e-mail » par « adresse électronique ».
Replace "adresse e-mail" (e-mail address) by "adresse électronique" (electronic address).
Ensure the only allowed author of top-level entries in feed is the person
the feed belongs to (a verified user). Ensure delete events only apply
if the deleted item belonged to that user.
This PR adds automatic backups to Nanobox instances. The database, Redis, and user files are backed up every day at 03:00 (server time) to the data warehouse component which comes with every Nanobox app. Old backups are automatically cleared out, but the number of backups that are left untouched can be configured by setting the `BACKUP_COUNT` environment variable to any integer value greater than 0 (the default is 1).
Also updated `.env.nanobox` to reflect the current `.env.production.sample`.
The old implementation sets default From address in mailers. It sets
the address from SMTP_FROM_ADDRESS, or notifications@localhost. The
behavior is occasionally undesired results.
In production environment, notifications@localhost is likely to be
incorrect.
In testing environment, the email address should not be varied by a
environment variable.
After appling this change,
In production environment, it will throw an exception when launching
Mastodon.
In testing environment, the address will be fixed with
notifications@localhost.
* add a system_font_ui setting on the server
* Plug the system_font_ui on the front-end
* add EN/FR locales for the new setting
* put Roboto after all other fonts
* remove trailing whitespace so CodeClimate is happy
* fix user_spec.rb
* correctly write user_spect this time
* slightly better way of adding the classes
* add comments to the system-font stack for clarification
* use .system-font for the class instead
* don't use multiple lines for comments
* remove trailing whitespace
* use the classnames module for consistency
* use `mastodon-font-sans-serif` instead of Roboto directly
* Update links in status content on update as well as mount
Fixes occasional bugs with mentions and hashtags not being set to open in a new column like they should, and instead opening in a new page
* use classList instead of raw className
This fixes a warning on status unmounting (e.g. deletion).
This also resets IntersectionObserverWrapper on disconnect to avoid `unobserve()` calls
which has bug in Edge.
* Fix embedded SVG fill attribute
SCSS darken/lighten functions may not return a color value, but a color
name like "white". See following example:
https://www.sassmeister.com/gist/c41da93b87d536890ddf30a1f42e7816
This patch will normalize $color argument to FFFFFF style.
I also changed the function name from "url-friendly-colour" to
"hex-color", Because...
1. The name "url-friendly" is not meaningful enough to describe what it
does.
2. It is familier to me using "color" rather than "colour"
kojima:kojiMac mastodon[master]$ git grep -l colour
app/javascript/styles/boost.scss
spec/fixtures/files/attachment.jpg
kojima:kojiMac mastodon[master]$ git grep -l color
.rspec
.scss-lint.yml
Gemfile.lock
app/javascript/mastodon/features/status/components/action_bar.js
app/javascript/styles/about.scss
app/javascript/styles/accounts.scss
app/javascript/styles/admin.scss
app/javascript/styles/basics.scss
app/javascript/styles/boost.scss
app/javascript/styles/compact_header.scss
app/javascript/styles/components.scss
app/javascript/styles/containers.scss
app/javascript/styles/footer.scss
app/javascript/styles/forms.scss
app/javascript/styles/landing_strip.scss
app/javascript/styles/reset.scss
app/javascript/styles/stream_entries.scss
app/javascript/styles/tables.scss
app/javascript/styles/variables.scss
app/views/admin/subscriptions/_subscription.html.haml
app/views/layouts/application.html.haml
app/views/layouts/error.html.haml
app/views/manifests/show.json.rabl
bin/webpack-dev-server
config/initializers/httplog.rb
public/500.html
public/emoji/1f1e6-1f1e8.svg
public/emoji/1f1ec-1f1f8.svg
public/emoji/1f1f3-1f1ee.svg
public/emoji/1f1fb-1f1ec.svg
spec/fixtures/requests/idn.txt
yarn.lock
* Add semicolon
* Added Korean Translation (based on japanese)
* Update korean translation
* Update korean translation: fix syntax error
* Updated korean translation
* Update korean translation
* Update ko.json
Translate non-translated parts
* Update ko.yml
Translated missed parts - and fixed some typos
* Create simple_form.ko.yml
* Updated korean translation
* i18n: fix test fails
* Updated korean translation
* Added Korean Translation (based on japanese)
* Update korean translation
* Update korean translation: fix syntax error
* Updated korean translation
* Update korean translation
* Update ko.json
Translate non-translated parts
* Update ko.yml
Translated missed parts - and fixed some typos
* Create simple_form.ko.yml
* Updated korean translation
* i18n: fix test fails
In from_redis method, statuses retrieved from the database was mapped to
the IDs retrieved from Redis. It was equivalent to order from high to low
because those IDs are sorted in the same order.
Statuses are ordered with the ID by default, so we do not have to reorder.
Sorting statuses in the database is even faster since the IDs are indexed
with B-tree.
* add missing locales for French translation
* accent "Media" in the front-end locales
* images => médias
* Change 'rapport' to 'signalement' in French locales to be more coherent
* fix typo
* remove duplicate EN locale
* translate missing locales
* update missing locale
* fix typo
* unify with "utilisateur⋅ice⋅s"
* address PR comments
* Update aws-sdk to version 2.10.4
* Update bootsnap to version 1.1.1
* Update capistrano to version 3.8.2
* Update capybara to version 2.14.4
* Update cld3 to version 3.1.3
* Update http_accept_language to version 2.1.1
* Update sidekiq to version 5.0.3
* Update rspec-sidekiq to version 3.0.3
* Update sidekiq-scheduler to version 2.1.7
* Update oj to version 3.2.0
* Update openssl to version 2.0.4
* Update pg to version 0.21.0
* Update twitter-text to version 1.14.6
* Update unicode-display_width to version 1.3.0
* Update scss_lint to version 0.54.0
* Update hamlit to version 2.8.4
* Update erubi to version 1.6.1
* Update httplog to version 0.99.4
* Update aws-sdk to version 2.10.6
* Use instance name in "password changed" mail
instead of "Mastodon".
Fixes tootsuite#2620.
* Use instance name in password reset mail
instead of "Mastodon".
When Windows checks out files, it defaults to changing line endings to CRLF. If these files are then copied to a Linux system to be run, and the endings aren't changed at some point in that process, things break. This file forces git to use LF for all text files on all systems (except the request testing specfiles) to prevent issues everywhere.
* Fix#3910 - Require OTP authentication to disable 2FA. Also, remove ability
to generate new OTP backup codes *after* initial backup codes were handed
out during activation
* Restore recovery code re-generation
* Improve display of some 2FA elements
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Fix#2347 - Bind web UI access token to session
When you logout, session also destroys the access token, so it's no longer
valid. If access token is destroyed some other way, the session is also
destroyed, requiring a re-login.
Fix#1681 - Add scheduler to remove revoked access tokens and grants
* Fix test
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
Setting ASSET_HOST to `http://0.0.0.0:8080` makes urls in manifest.json to
be invalid, e.g. `http://0.0.0.0:8080/packs/application.js`.
Anyway, we don't need set this on build:development because assets would
be delivered from same origin in development (and w/o dev-server).
Webpack seems to fail to import `react-intl/locale-data/*.js` if those
files has been proceed by babel, and this also breaks applying our translation.
Note that this won't be a problem on English locale, because react-intl
includes it as default and works fine without manually added locale-data.
Also this issue seems to only occurs on production build, but I'm not sure
about reason.
# You can generate the keys using the following command (first is the private key, second is the public one)
# You should only generate this once per instance. If you later decide to change it, all push subscription will
# be invalidated, requiring the users to access the website again to resubscribe.
#
# Generate with `rake mastodon:webpush:generate_vapid_key` task (`docker-compose run --rm web rake mastodon:webpush:generate_vapid_key` if you use docker compose)
#
# For more information visit https://rossta.net/blog/using-the-web-push-api-with-vapid.html
VAPID_PRIVATE_KEY=
VAPID_PUBLIC_KEY=
# Registrations
# Single user mode will disable registrations and redirect frontpage to the first profile
Mastodon is a free, open-source social network server. A decentralized solution to commercial platforms, it avoids the risks of a single company monopolizing your communication. Anyone can run Mastodon and participate in the social network seamlessly.
An alternative implementation of the GNU social project. Based on [ActivityStreams](https://en.wikipedia.org/wiki/Activity_Streams_(format)), [Webfinger](https://en.wikipedia.org/wiki/WebFinger), [PubsubHubbub](https://en.wikipedia.org/wiki/PubSubHubbub) and [Salmon](https://en.wikipedia.org/wiki/Salmon_(protocol)).
An alternative implementation of the GNU social project. Based on [ActivityStreams](https://en.wikipedia.org/wiki/Activity_Streams_(format)), [Webfinger](https://en.wikipedia.org/wiki/WebFinger), [WebSub](https://en.wikipedia.org/wiki/WebSub) and [Salmon](https://en.wikipedia.org/wiki/Salmon_(protocol)).
Click on the screenshot to watch a demo of the UI:
@@ -34,7 +34,7 @@ If you would like, you can [support the development of this project on Patreon][
## Features
- **Fully interoperable with GNU social and any OStatus platform**
Whatever implements Atom feeds, ActivityStreams, Salmon, PubSubHubbub and Webfinger is part of the network
Whatever implements Atom feeds, ActivityStreams, Salmon, WebSub and Webfinger is part of the network
- **Real-time timeline updates**
See the updates of people you're following appear in real-time in the UI via WebSockets
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
